Display Information; Setting And Adjusting; Time Of Day - Horstmann ChannelPlus H27ZXL Series 2 User Operating Instructions Manual

Two zone central heating programmer

Hide thumbs

Table Of Contents

Table of Contents

The ChannelPlus H27ZXL Series 2

programmer has a fully graphical, back-

lit display. In the normal run mode the

display is divided into 2 sections, each

section represents a controlled channel.

The information displayed will change

depending upon the settings made and

which mode you are in. During different

programming modes and/or setting

screens the current time, day/date,

holiday indicator will only appear when

necessary, this is to reduce confusion

during the programming process. This is

explained further in later sections of this

guide.

ACTIVATING THE BACK–LIT DISPLAY

The display will illuminate for

approximately 1 minute whenever a

button is pressed.

To illuminate the display for viewing

purposes only press the green menu

button under the front flap twice.

SETTING AND ADJUSTING

When setting or adjusting, the programmer will automatically return to the running mode

if no buttons are pressed for approximately 1 minute.

If the setting or adjusting has not been finished, please start the procedure again.

TIME OF DAY

The ChannelPlus H27ZXL incorporates a factory set clock and calendar which means that no

adjustments should be necessary to the time of day and BST/GMT time changes take place

automatically.