Time Display; For Example; Setting Time Of Day - Horstmann Electronic 7 User Operating Instructions Manual

Time Display

The Electronic 7 is fitted with an automatic clock that is pre-set on
manufacture and should not normally require any adjustments by the
user. The summer / winter setting is automatically selected and will
automatically change. This is indicated on the screen next to the
appropriate setting.
Therefore no adjustment is needed to be made by the user for the
summer / winter clock change. Should a minor correction to the clock
be necessary or if the unit has been reset then see the section on

Setting Time of Day.

On installation the installer will have selected whether the Electronic 7
will switch at GMT times throughout the year or whether the timings
need to alter as the clocks change.

For example:

GMT/BST – Switching time will be changed by one hour. In the
GMT/BST mode the clock display will match the actual switching time.
GMT ONLY – Switching will always take place at GMT times (summer
and winter). Although the clock display will show the correct time.
Setting Time of Day
Press the green
"SET" button
until the
indicator on the
left hand side
of the screen is
next to
"CLOCK".
Adjust the hour
by pressing the
white "MINUS"
or "PLUS"
buttons. Once
you are happy
with the hour
selected, press
the blue
"SELECT"
button.
The minutes will
now flash. To
adjust the
minutes you
need to once
again press the
"MINUS" or
"PLUS" buttons.
Once you are
happy with the
time selected,
press the blue
"SELECT"
button, this will
now take it back
to the "RUN"
position on the
left hand side
of the screen.
4