Display Information; Setting And Adjusting; Time Of Day - Horstmann ChannelPlus H27XL Series 2 User Operating Instructions Manual

Display Information

Holiday
function
The ChannelPlus H27XL Series 2 Day
Time
active
Date
programmer has a fully graphical, back-
lit display. In the normal run mode the
display is divided into two sections, each
section represents a controlled channel.
The information displayed will change
Channel
depending upon the settings made and
header
which mode you are in. During different
programming modes and/or setting
screens the current time, day/date,
holiday indicator will only appear when
necessary, this is to reduce confusion
Channel/ Channel/
during the programming process. This is
Zone 1 Zone 2
status status
explained further in later sections of this
guide.
ACTIVATING THE BACK–LIT DISPLAY
The display will illuminate for
approximately 1 minute whenever a
button is pressed.
To illuminate the display for viewing
purposes only press the green menu
button under the front flap twice.

SETTING AND ADJUSTING

When setting or adjusting, the programmer will automatically return to the running mode
if no buttons are pressed for approx.1 minute.
If the setting or adjusting has not been finished, please start the procedure again.

TIME OF DAY

The ChannelPlus H27XL incorporates a factory set clock and calendar which means that no
adjustments should be necessary to the time of day and BST/GMT time changes take place
automatically.
3