Method 2: Connecting A Camcorder To The Av4; Input Jacks; Method 3: Connecting A Camcorder To The Dv In; Jack - Hitachi DV-RX7000E Instruction Manual

Method 2: Connecting a Camcorder
to the AV 4 Input jacks
You can also use the AV 4 IN jacks on the front panel
of the DVD Recorder. You can record from connected
equipment.
When an input source is inserted into AV 4 while
viewing TV, the input will be switched to AV 4
automatically.
DV IN
AV4 IN S-VIDEO IN VIDEO IN L(mono) AUDIO IN R
or
■ You can also use the AV4 IN jacks on the front
panel of the DVD Recorder.
NOTE
■ When the S-Video jack and Video jack are both
connected, the S-Video jack will have priority.
AV IN Selection will be automatically done.
■ Copy protected content cannot be recorded.
20 - English
If your camcorder has a DV output jack, connect it to
the DV input jack of your DVD Recorder.
With DVs, only input jacks can be used.
PROGRAM
To external divice
After all connections are complete, plug the mains lead
in the wall outlet.Your DVD Recorder will automatically
set itself up. Refer to page 24.
Method 3: Connecting a Camcorder
to the DV IN jack
DV IN
AV4 IN S-VIDEO IN VIDEO IN L(mono) AUDIO IN R
Step 6: Connecting the
Mains Lead
PROGRAM
To external divice