Table of Contents
Advertisement
Method 2: Aerial + VCR/satellite
receiver/cable box + DVD Recorder
+ TV
1
external device
(VCR/satellite receiver/cable box)
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
1. Connect the cable from the aerial/cable TV outlet to
the aerial input on your VCR/satellite receiver/cable
box.
2. Connect the aerial output of your VCR/satellite
receiver/cable box to the ANTENNA IN of DVD-
Recorder using aerial cable.
3. Use another RF aerial cable to connect the
ANTENNA OUT of DVD-Recorder to the aerial input
on your TV.
4. Connect the AV1 connector on DVD-Recorder to the
SCART AV connector on TV using a SCART cable.
5. Connect the AV2 connector to a SCART AV
connector on VCR/satellite receiver/cable box.
6. Setup "AV1 Out option" using on-screen menu. Refer
to page 29.
16 - English
5
2
3
4
Method 3: Aerial + DVD Recorder +
external decoder box + TV
If you connect external decoder box to DVD recorder,
you can record scrambled channels received through
the built-in TV tuner in DVD-Recorder.
Wall
1
DECODER
2
1. Connect RF aerial cables as shown.
2. Connect the AV1 connector on this recorder to the
SCART AV connector on TV using a SCART cable.
3. Connect the AV2 connector to a SCART AV
connector on decoder box.
4. Set channel decoding function on using on-screen
menu. Refer to page 27.
3
4
TV
Advertisement
Table of Contents
