Step 3 : Other Type Of Connecting The Video Output Cable; Method 1: Connecting To A Composite Video Output; Jack; Method 2: Connecting To An S-Video Output Jack - Hitachi DV-RX7000E Instruction Manual

Step 3: Other type of connect-
ing the Video output cable
There are several ways to output video signal not using
SCARTcables. Select one of the following video
connecting that best suits you below.
• Method 1: Connecting to a Composite Video output jack

• Method 2: Connecting to an S-video output jack

S-Video Output Modes
• S-Video output are available only if your TV supports S-
Video input. If S-Video output does not work, check the
TV connections and the TV input selection settings. (For
information on how to connect to a TV, see pages 15 to
16.)
Method 1: Connecting to a
Composite Video output jack
Connect a video (yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) IN jack on the TV (or AV amplifier).
• You will enjoy regular quality images.
• Connect audio cables (white and red) between the
ANALOG AUDIO OUT jacks on the DVD Recorder and
AUDIO IN jacks on TV (or AV amplifier). (See page 18)
Method 2: Connecting to an S-video
output jack
Connect an S-video cable (not supplied) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN
jack on the TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates the
picture element into black and white (Y) and colour (C)
signals to present clearer images than regular video
input mode.
English - 17