SMS
+CSDH, Show Text Mode Parameters
This command controls whether detailed header information is shown in text mode result codes.
Command
Type
Set
Read
The following table shows the +CSDH parameters.
<Parameter>
<show>
Example
AT+CSDH=?
+CSDH:(0,1)
OK
AT+CSDH?
+CSDH: 0
OK
AT+CMGR=160// SMS-SUBMIT
+CMGR: "STO UNSENT","0544565034",
ABC
OK
AT+CSDH=1
OK
AT+CMGR=160
+CMGR: "STO UNSENT","0544565034",,81,29,0,0,"04/11/04,09:48:36+08","+97254120032",145,3
ABC
OK
3-106
Syntax
Response/Action
+CSDH=[<show>]
OK
or:
+CMS ERROR: <err>
AT+CSDH?
+CSDH: (list of
supported <show>s)
OK
or:
+CMS ERROR: <err>
Table 3-58: +CSDH Parameters
0 - Means do not show header values defined in commands +CSCA and +CSMP
(<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or <tooa> in
+CMT, +CMGL, +CMGR result codes for SMS- DELIVERs and SMS-SUBMITs in
text mode; for SMS-COMMANDs in +CMGR result code, do not show <pid>,
<mn>, <da>, <toda>, <length> or <cdata> (default).
1 - Means show the values in result codes.
AT Commands Reference Manual
Remarks
The set command controls whether
detailed header information is shown
in text mode result codes.
The read command returns the current
<show> parameter value.
Description
December 31, 2007