1. Hold down power key and C key while pushing down the reset switch for about 3
seconds with the tip of a stylus until the message shown below appears on the display.
•
To cancel the full reset operation, press L Program key.
2. Press R Program key. This causes the message shown below to appear.
•
To cancel the full reset operation, press L Program key.
3. Press R Program key again to perform the full reset.
•
The full reset starts and all data in the memory are erased, and the start-up screen
appears.
Data stored in the Flashdisk folder remain unaffected.
E-48
R Program key
R Program key