Using The Software On The Macintosh Platform - The Basics; Downloading Images To The Computer - Canon PowerShot SD430 Software & Wireless Manual

Using the Software on the Macintosh
Platform – The Basics
This chapter explains the procedures for using ImageBrowser to download the camera's images
to the computer and print them.
Read this chapter after completing the preparations in the Using the Software on the
–
Macintosh Platform Preparations section.

Downloading Images to the Computer

Begin by downloading the images to your computer. The downloading procedure is slightly
different according to whether you are using a camera to computer connection (see below) or
a memory card reader (p. 51).
You may not be able to download the camera images if there are more than
approximately 1000 images in the camera. Use a memory card reader to
download in that case.
Camera to Computer Connection
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal. Prepare the camera for communication with the computer.
See the Camera User Guide for instructions to attach the camera to the
computer and set it to the correct mode for connecting.
The Camera Control Window will appear.
If it does not open, click the [CameraWindow] icon in the Dock (the bar at the bottom of
the desktop). To set whether this window automatically opens when you connect the
camera to the computer, remove the check mark from the [Start when a camera is
connected] in the [File] menu in the Camera Control window.
49