Automatically Saving Images To The Computer While Shooting (Auto Transfer) - Canon PowerShot SD430 Software & Wireless Manual

98
Using the Wireless Networking Function
Automatically Saving Images to the Computer
while Shooting (Auto Transfer)
This section explains the function for automatically transferring images immediately after being
shot to a computer connected wirelessly to the camera.
Computer commands cannot be initiated while this function is in use.
• The image is transferred to the computer after it records onto the memory
card in the camera. It is saved into the same folder as specified for
downloads using the Direct Transfer function.
• This function is not available for movies.
• See the Camera User Guide for instructions on operating your camera.
1
While connected, set the camera to a shooting mode.
For a wireless network connection, see Connecting (p. 85).
A window similar to the one at the right will
appear on the computer's screen.
2
Press the camera's M M ENU button.
3
In the [ (Wireless)] menu, select [Auto
Transfer].
4
Select [On] and press the M M ENU button.
The Auto Transfer function will be in effect and
the LCD monitor will change to the shooting
screen.
MENU
Button