Cisco WS-C2950-24 Configuration Manual page 127

Chapter 5 Clustering Switches
Figure 5-3 Suggested Candidate Window
78-6511-05
From the Cluster Builder topology, you can also add a candidate switch to a
cluster. Display Cluster Builder, right-click the candidate icon, and from the
pop-up menu, select Add to Cluster
labels, and candidates have blue labels. You can add a switch to a cluster if the
cluster has no more than 16 members; otherwise, you must remove a member
before adding a new one. The Add to Cluster option is disabled when the number
of cluster members reaches 16.
To add several switches to a cluster, press Ctrl, and left-click the candidates you
want to add. If any of the candidates cannot be added, Cluster Builder displays a
message that states which candidates were not added and why.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
(Figure 5-4). Cluster members have green
e.d
Creating a Switch Cluster
Enter the password of
the candidate switch.
If no password exists
for the switch, leave
this field blank for the
switch to join the
cluster.
Candidate switch
information.
5-15