Cisco WS-C2950-24 Configuration Manual page 149

Chapter 6 Configuring the System
Table 6-1 DHCP Server Configuration
Binding key
(hardware address)
IP address
Subnet mask
Router address
DNS server address 10.0.0.2
TFTP server name
Boot filename
(configuration file)
(optional)
Host name
(optional)
78-6511-05
Switch-1 Switch-2
00e0.9f1e.2001 00e0.9f1e.2002
10.0.0.21 10.0.0.22
255.255.255.0 255.255.255.0
10.0.0.10 10.0.0.10
10.0.0.2
maritsu or 10.0.0.3 maritsu or 10.0.0.3 maritsu or 10.0.0.3 maritsu or 10.0.0.3
switch1-confg switch2-confg
switch1 switch2
DNS Server Configuration
The DNS server maps the TFTP server name maritsu to IP address 10.0.0.3.
TFTP Server Configuration (on UNIX)
The TFTP server base directory is set to /tftpserver/work/. This directory contains
the network-confg file used in the two-file read method. This file contains the host
name to be assigned to the switch based on its IP address. The base directory also
contains a configuration file for each switch (switch1-confg, switch2-confg, and
so forth) as shown in this display:
prompt> cd /tftpserver/work/
prompt> ls
network-confg
switch1-confg
switch2-confg
switch3-confg
switch4-confg
prompt> cat network-confg
ip host switch1 10.0.0.21
ip host switch2 10.0.0.22
ip host switch3 10.0.0.23
ip host switch4 10.0.0.24
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Changing IP Information
Switch-3 Switch-4
00e0.9f1e.2003 00e0.9f1e.2004
10.0.0.23 10.0.0.24
255.255.255.0 255.255.255.0
10.0.0.10 10.0.0.10
10.0.0.2 10.0.0.2
switch3-confg switch4-confg
switch3 switch4
6-13