Table of Contents
Advertisement
Reversing the doors
IMPORTANT: Make sure you have enough room
to lay the appliance on its side, care should be
taken not to damage or break the condenser
coils on the rear of the fridge freezer.
You should also ensure that there are no sharp or hard objects
on the floor in this area.
THE APPLIANCE MUST BE DISCONNECTED FROM THE POWER
SUPPLY BEFORE COMMENCING THE DOOR REVERSAL PROCESS.
CERTAIN SECTIONS OF THIS PROCESS WILL REQUIRE TWO
PEOPLE TO COMPLETE IT.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
1. Open the fridge door and
remove the two fixing screws
that go through the right
hand hinge.
o Also remove the two middle
hinge screw caps on the left
hand side of the cabinet.
23
Advertisement
Table of Contents
