Baumatic BR200A User Manual
  1. Manuals
  2. Brands
  3. Baumatic Manuals
  4. Refrigerator
  5. BR200A
  6. User manual
Baumatic BR200A User Manual

Baumatic BR200A User Manual

Built-in larder fridge
Hide thumbs
Table of Contents

Advertisement

Quick Links

BR200A
Built-in Larder Fridge

Advertisement

Table of Contents
loading

Related Manuals for Baumatic BR200A

Summary of Contents for Baumatic BR200A

  • Page 1 BR200A Built-in Larder Fridge...
  • Page 2 User Manual for your BR200A BUILT-IN LARDER FRIDGE NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference.

  • Page 3: Table Of Contents

    CONTENTS YOUR APPLIANCE’S SPECIFICATIONS …….…….3 SAFETY INFORMATION / ENVIRONMENTAL NOTE .. 4 USING YOUR FRIDGE……………….……………..………5-10 YOUR BR200A FRIDGE …………………….………………….5 BEFORE USING YOUR FRIDGE…………….……………….…6 USING YOUR FRIDGE……………..……………………….…7-8 ARRANGING FOOD IN YOUR REFRIGERATOR …………9 NOTES ON USING YOUR FRIDGE …………………………10 CLEANING AND MAINTENANCE……….………………11-12 INSTALLING YOUR REFRIGERATOR ……...…………….13 FITTING THE DÉCOR DOOR ………………………….15-16 LEVELLING YOUR FRIDGE TO YOUR FLOOR ………..…16...
  • Page 4 Specifications of your BR200A Built-In Larder Fridge Congratulations on purchasing a Baumatic BR200A Built-in Fridge with icebox! Your Fridge has: Gross capacity: 214 litres Net capacity: 213 litres Energy efficiency class: A Automatic Defrost Adjustable Thermostat 5 Safety glass shelves...

  • Page 5: Electrical Safety

    Manufacturer declines all responsibility for any damage due to non- grounding of appliance. DURING THE GUARANTEE PERIOD ONLY BAUMATIC SERVICE ENGINEERS OR AN AUTHORISED AGENT OF • BAUMATIC SHOULD CARRY OUT REPAIRS ON THIS UNIT. DO NOT USE IF THE SUPPLY CORD IS DAMAGED. NEVER TAKE RISKS WITH FIRE! •...
  • Page 6 Using your Baumatic BR200A FRIDGE Your BR200A Built-in Larder Fridge: that this channel is never clogged. Use a plastic straw to clear away 1 SHELF: The shelves may be any dirt. placed in any of the guide slots 3 CRISPER TRAYS & SERVING TRAY...
  • Page 7 NOTE: BEFORE Using your BR200A FRIDGE: UPON DELIVERY: When your Fridge has been delivered, you will need to wait approximately 2 hours before turning it on. The fluid of the compressor installed in the appliance will need time to settle. PLEASE DO NOT PLUG IN ANY EARLIER THAN THIS! NOTE: We recommend that you...

  • Page 8: Your Appliance's Specifications

    USING your Baumatic BR200A LARDER FRIDGE YOU SWITCH ON YOUR APPLIANCE PLUGGING IT IN & SETTING THE THERMOSTAT inside the Fridge at the upper right-hand side: Your Fridge’s thermostat automatically regulates the inside temperature of the compartments. By rotating the thermostat knob from a low to a higher number position, colder temperatures can be obtained.
  • Page 9 USING your Baumatic BR200A LARDER-FRIDGE Reminder: Allow the unit time to settle after delivery. If your plug and power socket are now behind the fridge and you still need to move the unit into place, be especially careful. Remember to leave a safe distance between the back of the fridge and the wall or rear of the unit cabinet.
  • Page 10 ARRANGING FOOD IN YOUR FRIDGE • To reduce humidity and the consequent increase of frost, • DO NOT open the NEVER place liquids in unsealed containers in the refrigerator. refrigerator door too often Frost tends to concentrate in or leave it open for long the coldest parts of the spells of time.

  • Page 11: Notes On Using Your Fridge

    NOTES ON USING YOUR FRIDGE ALWAYS Cover and wrap foods, especially if they are PUNGENT. DO NOT place paper or plastic on the shelves which would • block the flow of air through the grids. NOTE: At the maximum cold setting, with a high outside (ambient) temperature and well-stocked (full or nearly full) compartments, the Fridge’s operation may be continuous, leading to the formation of some frost on the evaporator.

  • Page 12: Cleaning And Maintenance

    CLEANING / MAINTENANCE NOTE: Before attempting to clean your appliance, UNPLUG IT and make sure you do the following: WE RECOMMEND THAT YOU CLEAN YOUR REFRIGERATOR ONCE A MONTH. Pay particular attention to the sealing rubber bars of the doors. These need to be kept clean for hygienic reasons as well as to allow the door to close properly.
  • Page 13 CLEANING / MAINTENANCE To clean the condenser 1. Disconnect from the power supply. 2. Move the refrigerator out of its cabinet housing. TAKE EXTREME CARE whilst performing this. The back of the appliance consists of the condenser coils. These must be either dusted lightly or vacuumed.

  • Page 14: Installing Your Refrigerator

    The condenser at the bottom of the appliance must INSTALLING YOUR BR200A REFRIGERATOR always be clean and free of dust. Your appliance needs 200 cm² of open space beneath it for VENTILATION otherwise it will overheat and malfunction. 1225 mm You need to remove the back of the cabinet unit to allow 200 cm²...
  • Page 16 INSTALLING YOUR APPLIANCE- CONTINUED Fitting Bar Install the Fitting Bar (shown in the picture below), so that it attaches to the top of the appliance and underneath the top of the cabinetry, indicated by the arrow: *Please be aware that the Fitting Bar is not attached to the appliance and needs to be secured during installation.

  • Page 17: Fitting The Décor Door

    INSTALLING YOUR BR200A REFRIGERATOR Using a 3mm diameter bit, Fitting the Décor Door - make holes sufficient to attach the hinge rail brackets as shown in Fig. 2 on next 2) Fix the slide guides (attached in a plastic bag along with the screws ST 4.2 x 9.5) to the edge of the door.
  • Page 18 Fix the slides, being careful not to move them while fixing them into place (Fig. 4, above). Fix the slide guides to the original position. Close the door and check the gasket (it should not be creased). The door should open and close smoothly. Adjusting the feet to level your Appliance Adjust the feet (see picture at right) until your Fridge sits...

  • Page 19: Troubleshooting

    Reversing the swing of the Door 1) On the hinge-less side of the fridge’s door, remove the caps that cover the hinge bracket holes. Keep these in a safe place nearby. 2) Remove the upper hinge (2) using a star-head screwdriver to remove the screws.
  • Page 20 Trace a problem using the table below instead of having to call for help. PROBLEM WHAT TO DO CHECK THAT THE PLUG IS WELL-INSERTED INTO THE POWER SOCKET CHECK THAT THERE IS POWER FROM THE MAINS – THERE MAY BE A BLACKOUT OR YOUR FUSES MAY HAVE BLOWN.

  • Page 21: Conditions Of Guarantee

    *In addition, your appliance is covered by a 5 year parts warranty. Baumatic Ltd will provide free of charge the parts required to repair the appliance, only if they are fitted by a Baumatic engineer, for any defect that arises due to faulty materials or workmanship within a period of 5 years from the original purchase date.
  • Page 22 Baumatic Ltd Make-up for your kitchen Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax...

Table of Contents