Baumatic BF337SS User Manual page 23

4) Move the pin and washer that connects to the right hand hinge,
from the right hand hole to the left hand hole.
7) Carefully slide the upper door from the upper hinge pin (K) and
then using a star head screwdriver unscrew if from the cabinet.
8) Using a star-headed screwdriver, unscrew the upper hinge
assembly. Then using a flat-headed screwdriver, disassemble the top
panel that the upper hinge screwed into.
9) Take the top console panel and using a small flat-headed
screwdriver, push out the hole on the left hand side.
10) Screw the top hinge assembly back into place, making sure that it
is on the opposite side of the cabinet from its original position.
5) Remove the lower door by gently
sliding it downwards, away from the main
body of the fridge freezer.
6) Using a star-headed screwdriver, unscrew
the middle hinge and lift it out of its socket.
11) Screw the top panel back into
place and then reattach the upper
hinge pin (K). Making sure that it is
on the same side as the top hinge
assembly. IMPORTANT: You should
make sure that the position of the
upper pin hinge lines up exactly with
the hinge hole in the top of the upper
door.
23