Wireless Repeating Function - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Wireless Repeating Function

From the main menu, select Wireless Repeating Function to display the following screen:
Field
Enable Wireless Repeating Function Enable this if you wish to use either bridge mode or repeater mode,
Description
and then select the mode you want for your environment.
• Wireless Repeater. In this mode, the MVBR1210C will
communicate only with another Base Station–mode wireless
station. You need to enter the MAC address (physical address) of
the other base station–mode wireless station in the field provided.
WEP / WPA-PSK [TKIP] can (and should) be used to protect this
communication.
• Wireless Base Station. Select this only if this MVBR1210C is the
"master" for a group of repeater-mode wireless stations. The other
repeater-mode wireless stations need to be set to wireless
repeater-mode, using this MVBR1210C's MAC address. They then
send all traffic to this master, rather than communicating directly
with each other. WEP / WPA-PSK [TKIP] can (and should) be used
to protect this traffic. If this option is selected, you need to enter
the MAC addresses of the other access points in the fields
provided.
Advanced
80