Use Push 'N' Connect (Wps) To Configure Your Wireless Network; Wps Button - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
Use Push 'N' Connect (WPS) to Configure Your Wireless
Network
For you to use Push 'N' Connect, your wireless computers or devices need to support Wi-Fi
Protected Setup (WPS). Compatible equipment usually has the
can configure the network name (SSID) and set up WPA/WPA2 wireless security for the
router and the wireless computer or device at the same time.
Here are some considerations to consider when planning on using WPS to configure your
wireless network:
• NETGEAR's Push 'N' Connect feature is based on the WPS standard. All other
WiFi-certified and WPS-capable products should be compatible with NETGEAR products
that implement Push 'N' Connect.
• If your wireless network will include a combination of WPS-capable devices and
non-WPS-capable devices, NETGEAR suggests that you set up your wireless network
and security settings manually first, and use WPS only for adding WPS-capable devices.

WPS Button

Any wireless computer or wireless adapter that will connect to the router wirelessly is a client.
The client needs to support a WPS button and needs to have a WPS configuration utility,
such as the NETGEAR Smart Wizard or Atheros Jumpstart.

To use the router WPS button to add a WPS client:
1. Log in to the router as described in
2. On the router main menu, select Add
WPS Client, and then click Next.
By default, the Push Button
(recommended) radio button is
selected.
3. Either click the onscreen button or
press the WPS button on the front of
the router.
The router tries to communicate with the client (the computer that wants to join the
network) for 2 minutes.
4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility's
instructions to click a WPS button.
5. Go back to the router screen to check for a message.
Log In to Your Router
Wireless Network Configuration
31
WPS symbol on it. WPS
on page 12.
WPS
button