NETGEAR MVBR1210C User Manual page 13

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
• Firmware Upgrade Assistant screen. After initial setup, the Firmware Upgrade
Assistant screen displays unless the Check for Updated Firmware Upon Log-in check
box is cleared.
Note: You can disable this automatic checking and updating feature during
future log-ins by clearing the Check for Updated Firmware Upon
Log-in check box, but NETGEAR recommends that you keep this
feature enabled to ensure that your router is using the latest updated
firmware.
• Router Status screen. The Router Status screen displays the current router
connection status. See
4. You can use different methods to configure your router.
• Select Setup Wizard from the router menu to set up your Internet connection and
wireless network configuration. See
page 14.
• You can manually configure the router settings. See
Settings on page 15.
Router Status on page 64.
Access the Setup Wizard after Installation
Connecting to the Internet
13
Manually Configure Your Internet
on