Change The Administrator Login Time-Out; Run Diagnostic Utilities And Reboot The Router - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
2. From the main menu, under Maintenance, select Set Password.
3. To change the password, first enter the old password, and then enter the new password
twice.
4. Click Apply to save your changes.
Note: After changing the password, you need to log in again to continue
the configuration. If you have backed up the router settings
previously, you should do a new backup so that the saved settings
file includes the new password.

Change the Administrator Login Time-Out

For security, the administrator login to the router configuration times out after a period of
inactivity.

To change the time-out:
1. In the Set Password screen, type a number in the Administrator login times out field.
The suggested default value is 5 minutes.
2. Click Apply to save your changes, or click Cancel to keep the current period.

Run Diagnostic Utilities and Reboot the Router

The router has a diagnostics feature. You can use the Diagnostics screen to perform the
following functions from the router:
• Ping an IP address to test connectivity to see if you can reach a remote host. If Ping VPN
is enabled, the ping packet always goes through the VPN if the VPN tunnel is enabled
and working.
• Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that
the DNS server configuration is working.
• Display the routing table to identify what other routers the router is communicating with.
• Reboot the router to enable new network configurations to take effect or to clear problems
with the router's network connection.
Managing Your Network
71