4.2 Tying the Field Wiring in the NX4L1 Cabinet
Use the following figure as a guide to secure the field wiring in the NX4L1 cabinet.
Figure 2: Tying the Field Wiring in the NX4L1 Cabinet
NetAXS Access Control Unit NX4L1 Installation Guide, Document 7-901099, Revision A
Location of wire tie points
Pb
Pb
and suggested routing of
Class 2 power-limited field
wiring to maintain a
minimum of 0.25 inch
spacing from non-power-
limited wiring
NetAXS™ NX4L1 Installation
.
Wiring shown as ||||||||||||||||||||||||||||
represent shrink wrap barrier
protection (0.028 inch thickness
minimum) where spacing between
non-power-limited and power-limited
wiring is less than 0.25 inches.
Installation
11