Turn On The Printer - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

1 Ethernet port
To connect the printer to the network, plug one end of an Ethernet cable into the Ethernet port at the back of the printer, and the other end into a LAN drop
or hub.

Turn On the Printer

1. Plug one end of the power cable into the socket at the back of the printer and the other end into a properly grounded power outlet.
Do not use extension cords or power strips.
The printer should not be plugged into a UPS system.
2. Turn on the computer and the printer.
Print and Check the System Settings Page
Print the System Settings page.
From the Printer Operator Panel
1. Press until >SETUP appears, and then press
2. Press until >Reports appears, and then press
3. System Settings is displayed. Press
The System Settings page is printed.
.
.
.