Cisco 3845 - Security Bundle Router Software Manual page 225

Chapter 10 Configuring VLANs
Command
Step 17
Step 18 exit
Step 19 show running-config
Step 20
copy running-config startup-config
Follow the same steps on Switch B to configure the trunk port for Trunk 1 with a path cost of 30 for
VLANs 2 through 4, and configure the trunk port for Trunk 2 with a path cost of 30 for VLANs 8 through
10.
OL-23400-01
Purpose
Repeat Steps 9 through 11 on the other configured trunk interface on
Switch A, and set the spanning-tree path cost to 30 for VLANs 8, 9, and
10.
Return to privileged EXEC mode.
Verify your entries. In the display, verify that the path costs are set
correctly for both trunk interfaces.
(Optional) Save your entries in the configuration file.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Configuring VLAN Trunks
10-17