Audience This guide is for networking professionals who are responsible for designing, implementing, or administering a network that includes a standalone Cisco Catalyst 3850 Switch or a Cisco Catalyst 3850 Switch stack, referred to ® as the switch. Readers of this guide are expected to have prior experience working with the Cisco IOS...
Cisco IOS XE Software Bundle and Packages Overview The Cisco Catalyst 3850 Switch uses Cisco IOS XE Software. Cisco IOS XE Software is delivered as a bundle that contains a set of packages. The Cisco IOS XE Software bundle uses this image name convention: <platform_name>_<bundle_feature_set>.<key_ver>.<IOS-XE_version>.<IOS_image_version>...
Page 5
The Cisco IOS Software image version of the Cisco IOS Software package contained in the 15.2(3)E bundle The Cisco IOS XE Software bundle contains a set of packages and a provisioning file, called packages.conf, that is created automatically during the install process. The show version running EXEC command displays the current running package(s) version: Switch# show version running Package: Base, version: 03.07.00E, status: active...
Wireless controller software Booting Cisco IOS XE Software You can boot and run the Cisco IOS XE Software on the Cisco Catalyst 3850 Switch in either of two modes: ● Install mode (recommended mode of operation) ●...
Booting the Cisco Catalyst 3850 Switch in Bundle Mode Booting a Cisco Catalyst 3850 Switch in bundle mode is just like booting a monolithic Cisco IOS Software image on a Cisco Catalyst 3750-X Switch. This command boots the switch in bundle mode: switch: boot flash:cat3k_caa-universalk9.SPA.03.07.00.E.152-3.E.bin...
Switch# software rollback provisioning-file flash:packages.conf.00- Software Clean Flash space in a Cisco Catalyst 3850 Switch can be recovered safely by using the software clean command. This command deletes any redundant package files (.pkg), bundle files (.bin), or provisioning files (packages.conf*), without deleting the active .pkg and .conf file.
Page 10
[1 2]: Clean up completed Boot Loader Upgrade The Cisco Catalyst 3850 Switch shipped from manufacturing is configured to autoboot Cisco IOS XE Software from the built-in flash and display the autoconfiguration dialog. In special circumstances a boot loader upgrade might be necessary for a Cisco IOS XE Software image upgrade.
Migration to Install Mode from the Bootloader Prompt The Cisco IOS XE Software image for the Cisco Catalyst 3850 Switch is distributed as a bundle image. You cannot copy this bundle directly to the flash and then boot the switch. You must install the Cisco IOS XE Software bundle into the flash and then boot the switch from the installed software using the install mode.
About the Cisco Catalyst 3850 Switch RTU license: ● The RTU license is purchased along with the Cisco Catalyst 3850 Switch (or separately) and is NOT tied to the unique device identifier (product ID + serial number) of a switch.
AP Count Licenses Remaining: 10 Image-Based License in a Stack In a Cisco Catalyst 3850 Switch stack, all switches must be at the same image-based license (IP Services/IP Base/LAN Base) level. The active switch license level is considered the reference, and the member switch licenses are compared to it.
Catalyst 3850 Switch is configured only as an mobility agent, which is the default configuration. The total AP-Count license of a Cisco Catalyst 3850 Switch stack is equal to the sum of all the individual member AP-Count licenses, up to a maximum of 50 AP-Counts. The total AP-Count license of the stack is affected when stack members are added or removed: ●...
Page 20
AP Count Licenses Remaining: 50 By default the Cisco Catalyst 3850 Switch stack is configured as a mobility agent. In the wireless licensing model, a mobility agent is the access point count enforcement point. A mobility controller is the access point count management point.
Licensing Protocol Call Flow In a large deployment, a Cisco Catalyst 3850 Switch stack is the mobility agent, and a 5760 wireless controller is the mobility controller. In a split mobility agent-mobility controller deployment, the AP-Count is managed at the mobility controller level.
License Usage Monitoring The license usage record is maintained in the Cisco Catalyst 3850 Switch or switch stack for individual switches. The usage information is maintained from the initial boot and across reloads and includes the status of the EULA, in-use condition, and type of license.
Cisco made significant changes to the StackWise Plus hardware and software architecture for the Cisco Catalyst 3850 Switch. The new Cisco Catalyst 3850 Switch is built upon high-speed next- generation Cisco application-specific integrated circuit (ASIC) technology and combined with the feature-rich and powerful Cisco IOS XE Software operating system.
Page 27
Figure 5. Cisco Catalyst 3850 StackWise-480 Switch Stack Rear View The system architecture of the Cisco Catalyst 3850 Switch is designed to evolve as a solution engine that enables converged access infrastructure and rich integrated technologies with unparalleled application performance. This new Cisco switch delivers the simplified system operation tools that network administrators need to manage increasingly complex and feature-rich networks.
Stack architecture allows network expansion when additional ports are required in the wiring closet. The hardware and software architecture of the Cisco Catalyst 3850 Switch allows you to insert new Cisco Catalyst 3850 Switches in a stack ring without major network disruption. The system and management operation, network configuration, and topologies remain transparent to the network, providing nonstop business communication during the upgrade.
Page 29
To enable stateful switchover (SSO) resiliency in Cisco StackWise-480 mode, you must configure each switch with the same Cisco IOS XE Software version and license. Figure 7 illustrates system roles and operation of Cisco StackWise-480 when you add Cisco Catalyst 3850 Switches to a stack.
Page 30
Ready The Cisco Catalyst 3850 Switches support a wide range of Layer 2, Layer 3, and wireless stateful capabilities to provide nonstop network communication. In real time, the Cisco IOS XE Software running on the active switch synchronizes its protocol state machines, software forwarding tables, and system configuration to the Cisco IOS XE Software instance running on the standby switch.
Cisco StackWise-480 mode. No user configuration is required to enable SSO capability on a Cisco Catalyst 3850 Switch stack. You can verify that SSO is configured and operational by using the show redundancy state command. This is sample output showing SSO redundancy in a Cisco StackWise-480-based network design:...
NetFlow, security access control, flow SPAN, multicast groups, and more. VLAN: This template is available only in the LAN base license level and is enabled when the Cisco Catalyst 3850 Switch is deployed as a Layer 2 switch. Wireless features will not work with this SDM template configuration.
In a Cisco Catalyst 3850 Switch stack, an SDM template mismatch does NOT matter. As long as the license level matches, SDM mismatches are ignored, and all the stack switches use the active switch SDM template.