Hcpu_Prot_Mgr Messages - Cisco 3845 - Security Bundle Router Manual

HCPU_PROT_MGR Messages

Error Message HARDWARE-3-STATS_ERROR: Statistics ID [dec] is invalid.
HCPU_PROT_MGR Messages
Error Message HCPU_PROT_MGR-4-PROGRAM_POLICER_FAIL: Could not program policer for
port.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-20
The statistics ID used is out of range. The statistics supported by the port ASIC are
Explanation
identified by an ID. [dec] is the statistics ID.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
A hardware error could have occurred.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
Chapter 2 Messages and Recovery Procedures
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
OL-23408-01