NETGEAR WNR2200 - N300 Wireless Router Setup Manual page 37

Table 4. Wireless Router Default Configuration Settings (continued)
Feature
Firewall
Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Wireless
Wireless Communication
Name (2.4GHz b/g/n SSID)
Security
Broadcast SSID
Country/Region
11N 2.4GHz Channel
Operating Mode
Output Power
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.
Network Protocol and Standards Compatibility
Data and Routing Protocols:
Power Adapter
North America
United Kingdom, Australia
Europe
All regions (output)
Technical Specifications
Default Setting
Disabled (bars all unsolicited requests)
Enabled (all)
Enabled
NETGEAR
Disabled
Enabled
Europe
Auto
a
Up to 150Mbps
Full
TCP/IP, RIP-1, RIP-2, DHCP
PPP over Ethernet (PPPoE),
Point-to-Point Tunneling Protocol (PPTP)
120V, 60 Hz, input
240V, 50 Hz, input
230V, 50 Hz, input
12 V DC @ 1.5A output, 18W maximum
38