Audio Setting - Samsung DVD-R100 Instruction Manual

Audio Setting

Allows you to setup the audio device and sound status
settings depending on the audio system in use.
1
With the unit in Stop mode, press the MENU
button on the remote control.
No Disc
Timer Record
Scheduled Record List
MOVE SELECT
Select Setup using the ...† buttons, then
2
press the √ or ENTER button.
You can't use the Setup functions during disc playback.
No Disc
System
Language
Audio
Video
Parental Control
MOVE SELECT
Select Audio using the ...† buttons, then
3
press the √ or ENTER button.
Audio option menu will be displayed.
No Disc
System
Language
Audio
Video
Parental Control
MOVE SELECT
No Disc
Digital Output
DTS
Dynamic Compression : On
MOVE SELECT
62
- English
Timer Record
√ √
√ √
RETURN EXIT
Setup
√ √
√ √
√ √
√ √
√ √
RETURN EXIT
Setup
√ √
√ √
√ √
√ √
√ √
RETURN EXIT
Audio
: PCM
√ √
: Off
√ √
√ √
RETURN EXIT
4
Select the sub menu(Digital Output , DTS or
Dynamic Compression) using the ...†
buttons, then press the √ or ENTER button.
Digital Output, DTS: see page 28
No Disc
Digital Output
DTS
Dynamic Compression : Off
MOVE SELECT
Dynamic Range Compression : This is only active
when a Dolby Digital signal is detected.
- On : When the Movie-soundtracks are played at low
volume or from smaller speakers, the system can apply
appropriate compression to make low-level content
more intelligible and prevent dramatic passages from
getting too loud.
- Off : You can enjoy the movie with standard
Dynamic Range.
Use the ...† buttons to select the desired
5
item(PCM/ Bitstream, DTS-On/Off or
Dynamic Compression-On/Off).
Then press the √ or ENTER button.
Press the RETURN or œ button to return
to the previous menu.
NOTE
Press the MENU button to exit the menu.
Audio
: PCM
√ √
: Off
√ √
Off √ √
On
RETURN EXIT