DVD-Recorder
No Disc
Timer Rec.
Digital Output
Setup
DTS
Dynamic Compression : On
MOVE
ENTER
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression : On
MOVE
ENTER
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression : On
MOVE
ENTER
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression On
MOVE
ENTER
Downloaded From Disc-Player.com Samsung Manuals
Setting Up the Audio Options
You can connect the DVD-R157 to an external audio amplifi er or a
Audio
Home Theater system.
This allows you to setup the audio device and sound status settings
: PCM
►
depending on the audio system in use.
: Off
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
RETURN
EXIT
3. Select Audio using the ▲▼ buttons, then press the ENTER or ►
button.
4. Select the sub menu(Digital Output, DTS, Dynamic Compression)
using the ▲▼ buttons, then press the ENTER or ► button.
Select the item that matches the audio connection you've selected
on pages 21~23(Method 1, 2 and 3).
Digital Output
Audio
• PCM : Converts to PCM(2CH) 48kHz audio.
: PCM
PCM
►
Select PCM if your amplifi er system is stereo and/or Dolby Prologic.
: Off
Bitstream
►
►
• Bitstream : Outputs Bitstream.
Select Bitstream if your amplifi er system supports multi channel digital
audio surround decoding such as Dolby Digital and/or DTS.
RETURN
EXIT
DTS
Audio
• On : Outputs DTS bitstream. (via Digital Audio Output)
Select DTS when connecting to a digital amp with DTS decoder.
: PCM
►
: Off
►
Off
• Off : Doesn't output DTS bitstream.
On
►
• When DTS soundtrack is played, sound is not output from Analog Audio Output.
RETURN
EXIT
Dynamic Compression
Audio
This is only active when a Dolby Digital signal is detected.
: PCM
►
• On : When movie soundtracks are played at low volume or from small
: Off
►
speakers, the system can apply appropriate compression to make low-
►
Off
level content more intelligible and prevent dramatic passages from
On
getting too loud.
• Off : You can enjoy the movie with standard Dynamic Range.
RETURN
EXIT
5. Select the desired item(PCM, Bitstream, DTS-Off, DTS-On, Dynamic
Compression-Off or Dynamic Compression-On) using the ▲▼
buttons
Then press the ENTER or ► button.
English - 32