Timer Recording - Samsung DVD-R100 Instruction Manual

Video
The disc revolves, but no image or bad quality
images are displayed.
Check whether there is damage to or
Checkpoint 1
any foreign material on your disc.
Some low quality discs may not play
Checkpoint 2
properly.
If scenes change from dark to bright
Checkpoint 3
suddenly, the screen may shake vertical-
ly temporarily, but this is not a fault.
Checkpoint 4 Check the video output select switch
setting.
No progressive (480P) output.
Check whether the component video
Checkpoint 1
output switch is set to 480p.
(See page 18.)
Make sure to change the component
Checkpoint 2
video output switch setting when the
disc has stopped.
Audio is output but video is not displayed.
Check the component video output port
Checkpoint 1
selection switch on the back of the
product.
If the selection switch is set to 480p,
video and S-video are not output.
Set the switch to 480i. You can select a
component video output port only in
disc stop mode.
88
- English
Sound
No sound.
Are you watching a program in slow or
Checkpoint 1
skip mode?
If you are playing a program at a speed
other than normal speed, sound will not
be heard.
Check the connections and settings.
Checkpoint 2
Check whether the disc is damaged.
Checkpoint 3
Clean the disc, if necessary.
Checkpoint 4 Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Check whether you have selected the
Checkpoint 1
correct digital output options in the
Audio Output Options menu.
(See page 28.)

Timer Recording

Timer lamp flickers.
Check there is enough space in the disc
Checkpoint 1
for recording.
Check whether the current disc is
Checkpoint 2
recordable or not.
Make sure to check before the start time
of recording.