Recording From External Equipment You Are; Watching - Samsung DVD-R100 Instruction Manual

Recording from external
equipment you are watching
Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the
disc tray.
Wait until "LOADING" disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 31)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 31)
3
Press the INPUT button to select the input
source according to the connection you
made.
The front panel display changes in the following
sequence:
Channel Number
If you connect a digital camcorder, press the
INPUT button to select DV.
4
Press the REC MODE button repeatedly, (or
Press the REC MODE button and then press
the ...† button) to select the recording
speed(quality).
SP LP EP
Record Mode SP
34
- English
L1 L2 DV
XP
5
Press the REC button.
To pause recording
Press the REC PAUSE button to pause a recording in
progress.
Press the REC PAUSE button again to resume
recording.
You can switch channels by pressing the
buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a recording
in progress.
When using DVD-RAM/DVD-RW/DVD-R discs, the
message
'Updating the information of disc. Please wait for a
moment' is displayed.
You can not change the recording mode
and input source while recording.
NOTE
Recording will stop automatically if there
is no free space left for recording.
Up to 99 titles can be recorded onto a
disc.
Recording will stop automatically if a copy
protected image is selected.
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
this unit.
( / )
CH