Dell PowerEdge M420 Reference Manual page 1515

User Guidelines
This command has no user guidelines.
Example
The following example displays the SSH server configuration.
console#show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP Address User Name
------------- --------------------
10.240.1.122 John
user-key
Use the user-key command in SSH Public Key Chain Configuration mode to
specify which SSH public key you are configuring manually. To remove a SSH
public key, use the no form of this command.
Syntax
username
user-key
username
no user-key
username — Specifies the remote SSH client username. (Range: 1–48
•
characters)
• rsa — RSA key
• dsa — DSA key
Default Configuration
By default, there are no keys.
Command Mode
SSH Public Key Chain Configuration mode
{rsa | dsa}
Idle Time
--------------
00:00:00
SSH Commands
SessionTime
--------------
00:00:08
1511