Dell PowerEdge M420 Reference Manual page 1290

Syntax
show captive-portal configuration [
cp-id —Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name
----- --------------- ------------------ ----------------- ---------
1 cp1
2 cp2
3 cp3
console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client
MAC Address
-------------- --------------- --------- --------------------------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48
show captive-portal interface client status
Use the show captive-portal interface client status command to display
information about clients authenticated on all interfaces or a specific
interface.
1288
Captive Portal Commands
Client MAC Address Client IP Address Interface
0002.BC00.1290
0002.BC00.1291
0002.BC00.1292
0002.BC00.1293
Client
IP Address Interface
1/0/1
1/0/2
cp-id
] client status
10.254.96.47
10.254.96.48
10.254.96.49
10.254.96.50
Interface Description
Unit: 1 Slot: 0 Port: 1 Gigabit
Unit: 1 Slot: 0 Port: 2 Gigabit
1/0/1
1/0/2
1/0/3
1/0/4