Dell PowerEdge M420 Reference Manual page 1155

Default Configuration
Parameter
area-id
router-id
hello-interval
seconds
retransmit-interval
seconds
transmit-delay
seconds
dead-interval
seconds
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates the OSPF virtual interface for area 1 and its
neighbor router.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2
The following example configures a 20-second dead interval, a hello interval
of 20 seconds, a retransmit interval of 20 seconds, and a 20-second transmit
delay for the OSPF virtual interface on the virtual interface identified by area
1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 dead-
interval 20 hello-interval 20 retransmit-interval 20
transmit-delay 20
Default
No area ID is predefined.
No router ID is predefined.
10 seconds
5 seconds
1 second
40 seconds
OSPFv3 Commands
1155