Trunk Status Section (Spa8000) - Cisco Small Business SPA2102 Administration Manual

ATA Voice Field Reference
Info page
Cisco Small Business ATA Administration Guide
VoIP Call Decode
Latency
VoIP Call Jitter
VoIP Call Round
Trip Delay
VoIP Call Packets
Lost
VoIP Call Packet
Error
VoIP Call Mapped
RTP Port
Voice tab > Info page >

Trunk Status section (SPA8000)

Registration State
Last Registration At Last date and time the line was registered.
Next Registration In Number of seconds before the next registration renewal.
Message Waiting
Mapped SIP Port
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
Number of milliseconds for delay.
Number of packets lost.
Number of invalid packets received.
The port mapped for Real Time Protocol traffic for Call 1/2.
Indicates if the line has registered with the SIP proxy.
Indicates whether you have new voice mail waiting.
Options are either Yes or No. This value is updated when
voice mail notification is received. You can also manually
modify it to clear or set the flag. Setting this value to Yes
can activate stutter tone and VMWI signal. This parameter
is stored in long term memory and survives after reboot or
power cycle.
Port number of the SIP port mapped by NAT.
B
123