Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual page 145

Appendix C Using the Configuration/Setup Utility Program
Configuration/Setup Utility Menu Options
System Information
Choose this option to view information about your device. When you make
changes through other options in the Configuration/Setup Utility program, some
of those changes are reflected in the system information; you cannot change
settings directly in the system information.
This option is on the full Configuration/Setup Utility menu only.
Product Data
Choose this option to view the machine type and model of your device, the serial
number, and the revision level or issue date of the BIOS code stored in electrically
erasable programmable ROM (EEPROM).
System Card Data
Choose this option to view the identity of the system board, power supplies,
DASD backplane, and power backplane.
Devices and I/O Ports
Choose this option to view or change assignments for devices and input/output
(I/O) ports.
Choose this option to enable or disable integrated SAS and Ethernet controllers
and all standard ports (such as serial and parallel). If you disable a device, it
cannot be configured, and the operating system will not be able to detect it (this
is equivalent to disconnecting the device).
This option is on the full Configuration/Setup Utility menu only.
Date and Time
Choose this option to set the date and time in the device in 24-hour format
(hour:minute:second). This option is on the full Configuration/Setup Utility menu
only.
System Security
Choose this option to set passwords. This option is on the full
Configuration/Setup Utility menu only.
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
C-3
OL-15012-02