NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual page 268
Wireless 802.11g firewall/print server
Hide thumbs
Also See for FWG114Pv2 - Wireless Firewall With USB Print Server:
- Specifications (2 pages) ,
- Installation manual (2 pages) ,
- Introduction manual (11 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
–
Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Local IP
Subnet Mask field.
Figure G-9: NETGEAR FWG114P v2 VPN – Auto Policy (part 2)
–
From the Traffic Selector Remote IP drop-down box, select Subnet address.
–
Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote
IP Start IP Address field.
–
Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Remote
IP Finish IP Address field.
–
Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote
IP Subnet Mask field.
–
From the AH Configuration Authentication Algorithm drop-down box, select MD5.
–
Select Enable Encryption in the ESP Configuration Enable Encryption check box.
–
From the ESP Configuration Encryption Algorithm drop-down box, select 3DES.
–
Select Enable Authentication in the ESP Configuration Enable Authentication check box.
–
From the ESP Configuration Authentication Algorithm drop-down box, select MD5.
–
Select NETBIOS Enable in the NETBIOS Enable check box.
Click the Apply Button. You will be taken back to the VPN Policies Menu page.
5.
G-8
NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P v2
201-10301-02, May 2005
Advertisement
Table of Contents
Troubleshooting
