Firmware Upgrade - NETGEAR GS108Tv2 - ProSafe Gigabit Smart Switch Coming Soon User Manual

Firmware Upgrade

Note: After firmware downloading is complete, the device automatically
reboots. This will briefly disrupt network traffic through the device.
To upgrade the firmware you must first download a firmware upgrade file for the selected
device from the NETGEAR support web site to your PC. You can then download the firmware
to either Smart Switch primary or secondary storage.
You can check the progress of the firmware upgrade from the Tasks tab.
To upgrade firmware on the selected switch:
1. Select Maintenance > Firmware Upgrade.
The Firmware Upgrade dialog will display.
2. Click the Browse button and navigate to the location on your PC containing the firmware
upgrade file.
3. Select the upgrade file and click Apply.
The firmware will be downloaded from your PC to the device and the device automatically
reboots.
20 | Chapter 3. Maintenance
ProSafe Smart Control Center User Guide