Show Ip Pim Rp-Hash - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip pim rp-hash

show ip pim rp-hash GROUP-ADDRESS
Syntax Description
GROUP-ADDRESS
Default
Command Mode
Usage Guideline
Example
Switch#show ip pim
RP: 172.16.24.12
Info source: 172.16.24.12, via bootstrap
Uptime: 0DT1H42M15S, expires: 0DT0H2M16S
CLI Reference Guide
Use this command to display the rendezvous point (RP) to be chosen based on
the group selected.
Specifies the Group Address to display the selected RP of the group for.
None
User EXEC or any configuration mode
This command displays which RP was selected for the group specified. It also
shows whether this RP was selected by Auto-RP or the PIM Version 2 bootstrap
mechanism.
The following is sample output from the show ip pim rp-hash command with the
group address 239.1.1.1 specified:
rp-hash 239.1.1.1
Please refer to the table in the description of command show ip pim rp
mapping for the field descriptions.
show ip pim rp-hash
669