Maytag MED9700S - Electric Dryer Use And Care Manual page 29

Use and care guide
Hide thumbs Also See for MED9700S - Electric Dryer:
Table of Contents

Advertisement

Available languages

Available languages

From
Inside
the Dryer
Cabinet
lint should
be removed
every 2 years, or more often, depending
on dryer usage. Cleaning
should
be done by a qualified
person.
From the
Exhaust
Vent
Hint should
be removed
every 2 years, or more often, depending
on dryer usage.
Vacation
care
Operate
your dryer only when you are at home.
If you will be on vacation
or not using your
dryer for an extended
period
of time, you should:
1.
Unplug
dryer or disconnect
power.
2.
Clean lint screen. See "Cleaning
the lint
Screen."
Moving
care
For power
supply
cord-connected
dryers:
1.
Unplug
the power
supply
cord.
2. Make sure leveling legs are secure in dryer base.
3.
Use masking
tape to secure dryer door.
For direct-wired
dryers:
Electrical
Shock
Hazard
Disconnect
power
before
servicing.
Replace
all parts and panels
before
operating.
Failure
to do so can result
in death
or electrical
shock.
1.
Disconnect
power.
2. Disconnect wiring.
3.
Make sure leveling
legs are secure in dryer base.
4.
Use masking tape to secure dryer door.
The dryer light automatically
turns on inside the dryer drum when you open the door.
To change
the drum
light
1.
Unplug
dryer or disconnect
power,
2.
Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Remove
the screw located
in the lower right corner of the cover. Remove the cover.
3.
Turn bulb counterclockwise.
Replace the bulb with a 1O-watt appliance
bulb only.
Replace the cover and secure with the screw.
4.
Plug in dryer or reconnect
power.

Advertisement

Table of Contents
loading

Table of Contents