Table of Contents
Advertisement
RS-232C command table
How to read the command table
Command:
Command field (See page 32.)
Direction:
W When the "Parameter" is set in the parameter field (see page 32), the command functions as described
under "Control/Response Contents".
R The returned value indicated under "Reply" can be obtained by setting "????", "
(repeater control) in the parameter field (see page 32).
Parameter:
Parameter field (See page 32.)
Reply:
Response (Returned value)
*1:
"●" indicates a command which can be used in power standby mode regardless of the STANDBY MODE
setting.
"○" indicates a command which can also be used in power standby mode when STANDBY MODE is set to
STANDARD.
"–" indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.
*2:
PN-ZB02 (optional) limitations
(A) When PN-ZB02 (optional) is not attached, (B) When PN-ZB02 (optional) is attached.
○ : The command can be used.
- : Error (ERR)
Power control/Input mode selection
Function
Command
POWER CONTROL
POWR
INPUT MODE SELECTION
INPS
Controlling the Monitor with a PC (RS-232C)
Direction
Parameter
Reply
W
0
1
R
W
0
1
2
3
4
6
7
8
9
10
R
10 PC HDMI
Control/Response contents
Switches to standby mode.
Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
Toggle change for input mode. Terminals not selected in INPUT SELECT
cannot be selected.
PC DVI-D
"ERR" when AV DVI-D is selected for DVI of INPUT SELECT.
PC D-SUB
AV COMPONENT
"ERR" when PC RGB is selected for BNC of INPUT SELECT.
AV VIDEO
PC RGB
"ERR" when AV COMPONENT is selected for BNC of INPUT SELECT.
AV DVI-D
"ERR" when PC DVI-D is selected for DVI of INPUT SELECT.
AV S-VIDEO
AV HDMI
"ERR" when PC HDMI is selected for HDMI of INPUT SELECT.
PC HDMI
"ERR" when AV HDMI is selected for HDMI of INPUT SELECT.
1 PC DVI-D
2 PC D-SUB
3 AV COMPONENT
4 AV VIDEO
6 PC RGB
7 AV DVI-D
8 AV S-VIDEO
9 AV HDMI
?" or "???+"
*2
*1
(A) (B)
● ○ ○
○ ○
○
-
○ ○
○
-
○
-
●
○
-
○
-
○
-
○ ○
○ ○
● ○ ○
37
E
Advertisement
Table of Contents
