Rs-232C Command Table - Sharp PN-HS551 Operation Manual

RS-232C command table

How to read the command table
Command: Command field (See page 28.)
Direction: W When the "Parameter" is set in the parameter field (see page 28), the command functions as described
under "Control/Response Contents".
R The returned value indicated under "Reply" can be obtained by setting "????" or "
parameter field. (See page 28.)
Parameter: Parameter field (See page 28.)
Reply: Response (Returned value)
* : "●" :
" " :
"–" :
Power control/Input mode selection
Function
POWER CONTROL
INPUT MODE SELECTION
PICTURE menu
Function
BRIGHT
SIZE (Screen size selection)
COLOR MODE
WHITE BALANCE
R-CONTRAST
G-CONTRAST
B-CONTRAST
SETUP menu
Function
DATE/TIME SETTING
Telnet User name
Telnet Password
THERMAL SENSOR SETTING
Model
Serial no.
AUTO
ALL RESET
Controlling the Monitor with a computer (RS-232C)
Indicates a command which can be used in standby state, input signal waiting state or when the
power is on.
Indicates a command which can be used in input signal waiting state or when the power is on.
Indicates a command which can be used when the power is on.
Command Direction Parameter
POWR W
R
INPS WR
Command Direction Parameter
VLMP WR 0-50
WIDE WR
BMOD WR
WHBL WR
CRTR WR 0-255
CRTG WR 0-255
CRTB WR 0-255
Command Direction Parameter
DATE WR AABBCCDDEE
USER WR XXXXXXXX
PASS WR XXXXXXXX
STDR WR
INF1 R
SRNO R
ASNC W
RSET W
Reply
0 Switches to standby state.
1 Returns from standby state.
0 Standby state
1 Normal mode
2 Input signal waiting state
0 Toggle change for input mode.
2 D-SUB
10 HDMI1
11 USB
13 HDMI2
18 HDMI3
Reply
0-50
1-4 1-4 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM
0 0 STD
2 2 VIVID
3 3 sRGB
4 4 HIGH ILLUMINANCE
0-2 0-2 0:THRU, 1:PRESET, 2:USER
0-255 "ERR" when WHBL is not set to 2.
0-255
0-255
Reply
AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Hour, EE: Minute
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
XXXXXXXX 8 characters or less; half-width alphanumeric characters, "-", and "_".
(The field can be left blank, but spaces cannot be entered.)
0-3 0-3 0: LANDSCAPE, 1: PORTRAIT, 2: FACE UP, 3: FACE DOWN
Value
Value
1 Adjust CLOCK/PHASE/H-POS/V-POS automatically in D-SUB
0
?" in the
Control/Response contents
Control/Response contents
Control/Response contents
*
●
*
-
*
-
●
-
29
E