Page Set Up - Brother HL-1070 - B/W Laser Printer Technical Reference Manual

2001/10/02
User reset
EscCR!#R
# = 0, the printer restores to the current user setting.
# = 1, the printer restores to user settings 1.
# = 2, the printer restores to user settings 2.
Paper Input Control
EscEMn
n Value
n = 0
n = 1
n = 2
n = 3
n = 4
n = 5
n = R
n Value
n = 0
n = 1/2
n = R
n Value
n = 0
n = 1
n = 2
n = R
Enable out-of-paper sensor
Esc9
The printer ignores this command.
Disable out-of-paper sensor
Esc8
The printer ignores this command.
6.2.

Page set up

Set page length
EscCn
This command sets the page length in lines.
or
EscCNULn (27)(67)(00)n
This command sets the page length in inches.
The top of form position is set to be the current line.
n is the number of lines that make up one page, or the length of the page in inches, according to which
form of the command is used.
If the first form of the command is used (n = the number of lines in the page) the current line spacing
setting is used to determine the length of the page.
If the first form of the command is used, n must be in the range 1 to 127.
(27)(13)(33)#(82)
(27)(25)n
HL-1660e/2060/2400C/2400Ce/3400CN/3260N/2460
Initialize the feeder mode.
Feed from the MP tray.
Feed from Tray 1.
Feed from Tray 2.
Feed from Tray 3.
Feed from Tray 4.
Eject paper.
HL-1050
Initialize the feeder mode.
Feed from the tray.
Eject paper.
HL-1250/1270N/1450/1470N/P2500/1650/1670N
Initialize the feeder mode.
Feed from the Tray 1.
Feed from the Tray 2.
Eject paper.
(27)(57)
(27)(56)
(27)(67)n
CHAPTER 6 EPSON - 12
<1Bh><0Dh><21h>#<52h>
<1Bh><19h>n
<1Bh><39h>
<1Bh><38h>
<1Bh><43h>n
<1Bh><43h><00h>n