Moving The Pattern In Parallel 2 - Brother BAS-311E Instruction Manual

Moving in parallel
1. Move the work clamp with
when the needle point is at A of the
L
pattern.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press .
P

Moving the pattern in parallel 2

Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
Moving
1. Press and press
2
The needle point moves to point A.
. Press
The program data is moved in parallel. The example
in the left is used for explanation of moving the
pattern in parallel when the first stitch is the escape
point.
.
Programmer
Chaprter 3 Programming with Command Function
155