Brother BAS-311E Instruction Manual page 33

Chapter 2 Programming with Help Function
5. Input the stitch length and press
6. Move the work clamp with
when the needle point is at point B of the
pattern.
7. Repeat step 6 and create the program to
point C.
8. When point C is programmed, press
again.
9. Create the program to point E.
10. When point E is programmed, press
again.
11. Create the program to point I.
12. When point I is programmed, press
again.
13. Press twice.
ESC ESC
Inputting the end code
1. Select with
2. Select the end code type with
press .
3. Press .
ESC ESC
32
ESC ESC
and press
.
. Press
.
and
Programmer