Brother BAS-311E Instruction Manual page 106

Modifying the program of a multiple stitch
When modifying the stitch length or the number of lines for a multiple stitch, the previously created
curve program can be used.
The previously created programs are required for modifying programs of multiple stitch.
Programs of multiple stitch written to floppy disks cannot be modified.
1. Select and press
2. Press
9 9 9
The work clamp moves. When the needle point is at the start point for a multiple stitch, stop it by pressing
.
3. Press .
ESC ESC
4. Select and press
5. Select and press
6. Input the stitch length and the number of lines. Press
Calculation is performed based on the input data. When a buzzer stops, the needle point moves to the end
point for a multiple stitch.
.
.
.
.
Programmer
Chapter 2 Programming with Help Function
.
105