Deleting The Escape Point; Moving The Pattern In Parallel; Moving The Pattern In Parallel (When The First Stitch Is The Sewing Start Point) - Brother PD-3000 Instruction Manual

CHAPTER 4 PROGRAMMING WITH COMMANDS

Deleting the escape point

The following describes how to delete the escape point A.
1. Carry out step 1 of "Procedure for modifying
program" to call program.
2. Press , and then press
The work clamp moves to the escape point.
3. Press .

Moving the pattern in parallel (when the first stitch is the sewing start point)

The following describes how to move the pattern in parallel when the first stitch is the sewing start point.
1. Carry out step 1 of "Procedure for modifying program" to call program.
2. Move the work clamp with
sheet.
3. Carry out steps 3 and 4 of "Procedure for modifying program" to save program.
116
4. Input the number of stitches to be deleted, and
.
5. Carry out steps 3 and 4 of "Procedure for
. Press
PD-3000
then press .
In the example, the first stitch is deleted.
.
The needle point moves to 1.
modifying program" to save program.
when the needle point is at point A of the pattern
Press