Table of Contents
Advertisement
5.2.4
Creating a RAID 1 set (Mirror)
To create a RAID 1 set:
1.
From the Define a New Array menu, select RAID Mode, then press
<Enter>. A pop-up menu appears.
2.
Use the up or down arrow keys to select
Mirroring, then press <Enter>.
5.
Press <TAB> to move to the Free Disks section.
6.
Highlight the hard disk drives that you want to add in the RAID set,
then press the right arrow key to select. The selected hard disk drives
appear in the Array Disks section. Repeat the process until all desired
hard disk drives are added.
RAID Mode:
Mirroring
Free Disks
Loc
Disk Model Name
1.0.M
XXXXXXXXXXXXXXXXXX
1.1.M
XXXXXXXXXXXXXXXXXX
2.0.M
XXXXXXXXXXXXXXXXXX
2.1.M
XXXXXXXXXXXXXXXXXX
[F6] Back
[F7] Finish
7.
After selecting the hard disk drives, press
<F7> to create the RAID 1 set. A pop-up
window appears.
8.
Press <Y> to delete all data from the hard disk drives and continue
creating the RAID set. Press <N> to backup exisitng data to a target
hard disk drive.
You will lose all data on the drives if you clear the disk data!
9.
The utility displays the created RAID 1 set. Press <Ctrl+X> to save
your settings and exit the utility.0
ASUS K8N-LR
NVIDIA RAID Utility
- Define a New Array -
Striping Block:
Array Disks
Loc
1.0.M
[→] Add
[←] Del
[TAB] Navigate
[↑↓] Select
Mirroring
Striping
Stripe Mirroring
Spanning
RAID 5
Oct 5 2004
Optimal
Disk Model Name
XXXXXXXXXXXXXXXXXX
[ENTER] Popup
Clear disk data?
[Y] YES
[N] Cancel
5-7
Advertisement
Table of Contents
