Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup; Smart Wizard Setup - NETGEAR DM111P - ADSL2+ Ethernet Modem Setup Manual

Two Setup Methods: 1) Smart Wizard Setup 2) Manual
Setup
You have two methods available for setting up your modem router:
• Smart Wizard Setup: Use the Smart Wizard on the CD to assist you with setting up your
modem router.
– This option is the easiest. The Smart Wizard on the CD guides you through the setup
process, automating many of the steps, and verifying that necessary conditions exist and
that steps you perform have been successfully completed.
– This option requires a PC running Microsoft Windows 98SE or higher.
• Manual Setup: Manually set up your modem router.
– This option is best if you are replacing an existing modem router or are technically
knowledgeable.
– Use this option if you are using a computer that does not run Microsoft Windows.
– The manual setup procedures are documented in this manual.
Use the setup option that best suites you.

Smart Wizard Setup

The Smart Wizard setup process should take about 20 minutes to complete.
Locate the ADSL settings information your Internet service provider gave you.
1.
Insert the NETGEAR CD into a Windows PC.
2.
The CD will automatically start and detect the language you are using on your PC.
If the CD does not automatically start, browse the CD and double-click on Autorun.
3. Accept the language option or change to a different language.
4. Click Next to proceed.
Click Setup to start the Smart Wizard installation assistant. Follow the instructions on the
5.
screen.
6 Connecting the Router to the Internet