Cisco 7906 Manual page 30

If you want to...
Create a conference by
barging a called on shared line
View a list of conference
participants
Get an updated list of
participants
See who started the
conference
Drop the last party added to
the conference
Remove any conference
participant
End your participation in a
conference
Tips
• Calls must be on the same line before you can add them to a conference using Confrn or Join. (Join
is available on SCCP phones only.)
• Depending on how your phone is configured, if you leave a conference after creating it, the
conference might end. To avoid this, transfer the conference before hanging up.
22
Then...
Highlight a call on a shared line and press cBarge. (You may need to
press the more softkey to display cBarge.)
See Using a Shared Line, page
1. Highlight an active conference.
2. Press ConfList.
Participants are listed in the order in which they join the
conference with the most recent additions at the top.
While viewing the conference list, press Update.
While viewing the conference list, locate the person listed at the
bottom of the list with an asterisk (*) next to the name.
Press RmLstC.
You can remove participants only if you initiated the conference call.
1. Highlight the participant's name.
2. Press Remove.
You can remove participants only if you initiated the conference.
Hang up or press EndCall.
26.
OL-11414-01