Basic Call Handling; Placing A Call-Basic Options - Cisco 7906 Manual

Basic Call Handling

You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.
Placing a Call—Basic Options
Here are some easy ways to place a call on your Cisco Unified IP Phone.
If you want to...
Place a call
Dial on-hook (with dial
tone)
Redial a number
Place a call when
another call is active
Dial from a call log
Tips
• You can dial on-hook without a dial tone (pre-dial). To pre-dial, enter a number, then go off-hook
by lifting the handset and press Dial.
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying
matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a
number displayed with Auto Dial, scroll to it, press Dial, and go off-hook.
• If you make a mistake while dialing, press << to erase digits.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.01 (SCCP and SIP)
Then...
Pick up the handset and dial the number.
Press NewCall and dial the number.
Press Redial.
1. Press .
2. Press New Call.
3. Enter a number.
1. Press and select Directories > Missed
Calls, Received Calls, or Placed Calls.
2. Scroll to the number and press Dial.
Basic Call Handling
For more information,
see...
An Overview of Your
Phone, page 9.
—
—
Using Hold and
Resume, page 16.
Using Call Logs,
page 37.
13