Ending A Call; Using Hold And Resume; Switching Between Multiple Calls - Cisco 7906 Manual

Ending a Call

To end a call, simply hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while monitoring a call (using
the speaker)
Hang up one call, but preserve another
call on the same line

Using Hold and Resume

Only one call can be active at any given time; all other connected calls must be placed on hold.
If you want to...
Put a call on hold
Remove a call from hold
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the call-on-hold icon:
button becomes lit (red). When a call that is not held is highlighted, and there are other held
calls on the line, the Hold button changes to blinking (red).

Switching Between Multiple Calls

You can switch between multiple calls on your phone.
If you want to...
Switch between connected
calls
Switch from a connected call
to answer a ringing call
16
Then...
Return the handset to its cradle. Or press EndCall.
Press EndCall.
Press EndCall. If necessary, remove the call from hold first.
Then...
1. Make sure the call you want to put on hold is highlighted.
2. Press .
1. Make sure the appropriate call is highlighted.
2. Press .
Then...
1. Make sure the call that you want to switch to is highlighted.
2. Press . Any active call is placed on hold and the selected call
is resumed.
Press Answer. Any active call is placed on hold.
. When a held call is highlighted, the Hold
OL-11414-01